Indietro
  1.  MATERIALE PER SALDATURA > Conformal coating

HumiSeal 1063 Stripper sverniciatore 1 litro

A41805

HumiSeal 1063 Stripper sverniciatore 1 litro - trasporto in ADR Saldatura - accessori, conformal coating.

Linea HUMISEAL
UM. NR
Disponibilità bassa
Disponibilità bassa
Generalmente disp. in 50 gg.

Contattaci:

02 4073747
Genera PDF del prodotto Download PDF
Chiama per il prezzo
Salva nei preferiti Salva nei preferiti Invia linkInvia link

ALLEGATI

Scheda prodotto
Download
scheda di sicurezza
Download

SCHEDA PRODOTTO

HumiSeal 1063 Stripper sverniciatore 1 litro

HumiSeal Stripper 1063 is:

used to strip 1A27 and 1A33 urethane families.
compliant with RoHS directive 2015/863/EU
safe for use on printed circuit board assemblies.
Stripper 1063 has:

flammable ingredients
Directions for Use

immerse the assembly into HumiSeal Stripper 1063
soak for 30-60 minutes
brush loose material from the assembly
clean the assembly with IPA, DI water or other qualified cleaning solution
inspect the assembly to ensure the coating has been completely removed
repeat the steps above if the coating is still on the assembly
bake for a minimum of 30 minutes @ 60 – 65°C after the final cleaning process

The use of heat is not required for use with HumiSeal Stripper 1063. A fully cured urethane coating of nominal thickness will typically dissolve readily within 30 to 60 minutes upon contact with HumiSeal Stripper 1063. It is important to thoroughly clean the assembly after the conformal coating removal process. Following the cleaning process, the assembly should be baked to remove residual moisture for a minimum of 30 minutes at 60 – 65°C.

Handling Precautions

Use only in well-ventilated areas.
Protective gloves and goggles should be worn.
In case of prolonged skin contact, wash with water.
In case of eye contact, flush with plenty amount of water and contact physician.
Avoid prolonged breathing of vapors.
Unused portions of HumiSeal products must be disposed of in compliance with all applicable environmental regulations.
Consult the Safety Data Sheet (SDS) for more specific product information.

Product Specification
Compatible HumiSeal® Coatings          1A27 & 1A33 Families
Average Wt.(lbs) /Gal @ 20°C                  2.10
Specific Gravity                                            0.84 ± .01
Relative Evaporating Rate (BuAc =1)     11.1
Shelf Life, DOM                                           12 months
Color                                                             Clear

SPESSO COMPRATI INSIEME

POTREBBERO INTERESSARTI ANCHE...