HumiSeal 1A33 Gel Urethane Conformal Coating 1L
Application of HumiSeal® 1A33 Gel
Cleanliness of the substrate is of extreme importance for the successful application of 1A33 Gel. Contamination under 1A33 Gel could cause problems that may lead to assembly failures. For best performance, surfaces should be free of moisture, dirt, wax, grease, flux residues and all other contaminants. If this product will be applied over “no clean” assembly materials, the user should conduct adequate testing to verify compatibility and reliability of the coated assembly
Syringe Application
HumiSeal® 1A33 Gel is intended for automated needle dispensing, but may also be applied manually.
Storage
HumiSeal® 1A33 Gel should be stored away from excessive heat or cold, in tightly closed containers. HumiSeal® products may be stored at temperatures of 0 to 35°C. Prior to use, allow the product to equilibrate for 24 hours at a room temperature of 18 to 32°C.
Caution
Application of HumiSeal® 1A33 Gel should be carried out in accordance with local and National Health and Safety regulations.
The solvents in HumiSeal® 1A33 Gel are flammable. Material should not be used in presence of open flame or sparks. Use only in well-ventilated areas to avoid inhalation of vapours or spray. Avoid contact with skin and eyes.
Salva nei preferiti
Invia link
